SKY1003-IVA automatic kinematic viscosity tester

SKY1003-IV automatic kinematic viscosity tester, suitable for the determination of crude oil, paraffin, light and heavy fuel oil, lubricating oil, additives, oil and other transparent or opaque kinematic viscosity of petroleum products. The test accuracy meets or exceeds the requirements of ASTM D445.

Related recommendations

Message consultation

Classification:

Petrochemical Products

Key words:

Product optimization

Detailed introduction:

Product Introduction

SKY1003-IV automatic kinematic viscosity tester, suitable for the determination of crude oil, paraffin, light and heavy fuel oil, lubricating oil, additives, oil and other transparent or opaque kinematic viscosity of petroleum products.
The test accuracy meets or exceeds the requirements of ASTM D445.

Applicable standards: ASTM D445, ASTM D446, GB/T265, GB/T30515, ISO3104, ISO3105, IP71

Product Features

The instrument adopts iSKvator technology, automatic sampling, constant temperature, viscosity testing, cleaning and drying viscometer, without random operation
Advanced NTC thermistor measurement technology, the test is not interfered by sample color and ambient brightness, and can test transparent, dark and opaque
Ming petroleum products to the same precision
Improved Ubelohde capillary viscometer with independent intellectual property rights, each viscometer has a test range of 100 times
Kinematic viscosity measurement range: 0.5 ~ 10000cSt
Automatic preheating of waxy oil samples or heavy oil
Dual solvent cleaning system, user-programmable cleaning program
Use dry air to dry the viscosity tube to ensure the accuracy of the test
Corrosion resistant design, can accept most corrosive cleaning solvents
Only about 10ml of test oil sample
The whole cleaning process requires at least 10-15ml of cleaning solution.
The whole process of sample testing and cleaning only takes about 10min
The sample injection tray can be moved forward as a whole, and the protective cover of the transparent oil suction nozzle is installed in a card type, which is convenient for users to clean up the residue of the sample absorption regularly.
Software with temperature calibration function, viscosity tube calibration function and viscosity index automatic calculation function
12-bit automatic sample injection tray, after the software is registered and sorted, it can be unattended for continuous automatic testing, or it can be used for priority testing.
According to the characteristics of the experimental oil sample, the test and cleaning templates in the software can be modified to meet the individual needs of the test.
Real-time record of experimental data, easy to browse the experimental results and query the historical data
Can be connected to LIMS system to transmit data

Technical parameters

Technical parameters
Test Method	GB/T 265,GB/T 30515,ASTM D445, ISO 3104, IP 71,ASTM D446, ISO 3105.
Temperature control range	20 ℃ ~ 100 ℃ (special cold source shall be selected for 20 ℃)
Temperature control accuracy	± 0.01 ℃
Timing accuracy	0.02s
automatic injection	12-position automatic sample tray
Sample preheating	Room temperature ~ 95 ℃
Constant temperature bath capacity	2.5L
Constant temperature bath medium	Dimethicone
Viscosity test range	0.5~10000 mm2/s (by selecting different viscosity tubes)
Test accuracy	At or better than the level specified in ASTM D445
capillary viscometer	modified ub viscometer
Security	Cleaning fluid lack of tips, bath temperature overheating protection, high and low liquid level protection
Communication Interface	Host: Two RS232 ports
Data Output	LIMS or Printer
Overall power	≤ 1000W
Heating power	600W
Instrument use environment	Temperature: 5 ℃ ~ 35 ℃ Humidity: 20-90RH at 35 ℃, no condensation
Instrument power supply	AC 220V±10 50/60Hz
Overall dimension	400mm wide x 510mm deep x 710mm high
net weight of instrument	60KG (including constant temperature medium)